Please use this identifier to cite or link to this item: https://elar.usfeu.ru/handle/123456789/12131
Title: Обоснование технологических параметров процесса трелевки древесины мини-трактором при проходных рубках
Other Titles: Substantiation of the Technological Process Parameters of Wood Skidding with a Mini Tractor in Increment Thinning
Authors: Gerts, E. F.
Mekhrentsev, A. V.
Terinov, NN.
Urazova, A. F
Герц, Э. Ф.
Мехренцев, А. В.
Теринов, Н. Н.
Уразова, А. Ф.
Issue Date: 2022
Publisher: Northern Arctic Federal Univ M V Lomonosov
Северный (Арктический) федеральный университет им. М.В. Ломоносова
Citation: Обоснование технологических параметров процесса трелевки древесины мини-трактором при проходных рубках = Substantiation of the Technological Process Parameters of Wood Skidding with a Mini Tractor in Increment Thinning / Э. Ф. Герц, А. В. Мехренцев, Н. Н. Теринов, А. Ф. Уразова // Известия высших учебных заведений. Лесной журнал. – 2022. – Вып. 6. – С. 126-138.
Abstract: The paper considers the method of the mini tractor moving when skidding timber harvested during increment thinning. We analyzed the stand's horizontal structure formed as a result of intraspecific competition, as well as the partnership relations of the trees forming microgroups, the distance between which is less than the average distance between trees in the stand. The structure and parameters of the most typical microgroups that form stands were also observed. This allows choosing a route for a mini tractor and successfully moving it between microgroups, where the distance between trees is larger than the average distance in the stand. The article shows an analysis of the mutual arrangement of the mini tractor and trees of the neighboring microgroups, in which the passage of the mini tractor with a trailed device causes significant damage risks to trees. Based on the analysis, the maneuvering algorithm for this transport system is designed and the restrictions on its entry into the target between the trees are formulated. It is shown that the entry of a mini-tractor into the target between the trees at a right angle provides the best conditions for crossing this area. The minimum turning radius of the transport system, comprising a mini-tractor with a trailed device, when moving under the stand canopy should be less than the radius of the majority of the microgroups that form the stand. The calculation of the strip width required for the passage of a mini-tractor with a trailed device when skidding logs with length 2-6 m in the case of increment thinning in stands of the Ia, I, II and III quality classes with thinning up to the relative density of 0.7. The paper shows the possibility of substantiating the length of logs when carrying out an increment thinning depending on the quality class and age of the stand. It is found that the mini tractor parameters and the logs length correspond to the formed stand density, ensuring the smooth maneuvering of the mini tractor with a trailed device when moving under the stand canopy. Guidelines for correcting the route when the width of the required strip is larger than the average distance between trees in the resulting stand are given.
Рассмотрен метод перемещения мини-трактора при трелевке древесины, заготавливаемой в процессе проходной рубки. При этом анализировали не только горизонтальную структуру древостоя, сформировавшуюся в результате внутривидовой конкуренции, но и партнерские отношения образующих микрогруппы деревьев, расстояние между которыми меньше среднего расстояния между деревьями в древостое. Учтена структура и параметры наиболее характерных микрогрупп, формирующих древостои. Это позволяет выбрать маршрут для мини-трактора и успешно осуществлять его перемещение между микрогруппами, где расстояние между деревьями больше среднего расстояния в древостое. На основе анализа взаимного расположения мини-трактора и деревьев смежных микрогрупп, в которых проезд мини-трактора с прицепным устройством вызывает значительные риски повреждения деревьев, построен алгоритм маневрирования для этой транспортной системы и сформулированы ограничения ее входа в створ. Показано, что вход мини-трактора в створ между деревьями под прямым углом обеспечивает наилучшие условия пересечения створа. Минимальный радиус поворота транспортной системы, включающей мини-трактор с прицепным устройством, при перемещении под пологом древостоя должен быть меньше радиуса большей части микрогрупп, формирующих древостой. Выполнен расчет ширины коридора, необходимого для прохода мини-трактора с прицепным устройством при трелевке сортиментов длиной от 2 до 6 м в случае проведения проходной рубки в древостоях Iа, I, II и III классов бонитета при изреживании до относительной полноты 0,7. Показана возможность обоснования длины сортиментов при проведении проходной рубки в зависимости от бонитета и возраста древостоя. Установлено соответствие параметров мини-трактора и длины сортиментов густоте формируемого древостоя, обеспечивающее беспрепятственное маневрирование мини-трактора с прицепным устройством при перемещении под пологом древостоя. Приведены рекомендации по коррекции маршрута при ширине требуемого коридора большей, чем среднее расстояние между деревьями в древостое.
Keywords: INCREMENT THINNING
MINI TRACTOR
MINI TRACTOR MOTION
STAND HORIZONTAL STRUCTURE
MINIMIZING STAND DAMAGE
TIMBER SKIDDING
TIMBER SKIDDING TECHNOLOGICAL PARAMETERS
DISTANCE BETWEEN TREES IN THE STAND
ПРОХОДНЫЕ РУБКИ
МИНИ-ТРАКТОР
ДВИЖЕНИЕ МИНИ-ТРАКТОРА
ГОРИЗОНТАЛЬНАЯ СТРУКТУРА ДРЕВОСТОЯ
МИНИМИЗАЦИЯ ПОВРЕЖДЕНИЙ ДРЕВОСТОЯ
ТРЕЛЕВКА ДРЕВЕСИНЫ
ТЕХНОЛОГИЧЕСКИЕ ПАРАМЕТРЫ ТРЕЛЕВКИ
РАССТОЯНИЕ МЕЖДУ ДЕРЕВЬЯМИ В ДРЕВОСТОЕ
URI: https://elar.usfeu.ru/handle/123456789/12131
DOI: 10.37482/0536-1036-2022-6-126-138
WoS: WOS:000928223800004
RSCI: 49937521
Appears in Collections:Научные публикации, проиндексированные в SCOPUS и WoS CC

Files in This Item:
File Description SizeFormat 
WOS-000928223800004.pdf1,3 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.